M58WR064F-ZBE View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
M58WR064F-ZBE Datasheet PDF : 87 Pages
| |||
M58WR064FT, M58WR064FB
Table 34. Primary Algorithm-Specific Extended Query Table
Offset
Data
Description
(P)h = 39h
0050h
0052h Primary Algorithm extended Query table unique ASCII string “PRI”
0049h
(P+3)h = 3Ch 0031h Major version number, ASCII
(P+4)h = 3Dh 0033h Minor version number, ASCII
(P+5)h = 3Eh
(P+7)h = 40h
(P+8)h = 41h
00E6h
0003h
0000h
0000h
Extended Query table contents for Primary Algorithm. Address (P+5)h
contains less significant byte.
bit 0
Chip Erase supported
(1 = Yes, 0 = No)
bit 1
Erase Suspend supported
(1 = Yes, 0 = No)
bit 2
Program Suspend supported
(1 = Yes, 0 = No)
bit 3
Legacy Lock/Unlock supported
(1 = Yes, 0 = No)
bit 4
Queued Erase supported
(1 = Yes, 0 = No)
bit 5
Instant individual block locking supported(1 = Yes, 0 = No)
bit 6
Protection bits supported
(1 = Yes, 0 = No)
bit 7
Page mode read supported
(1 = Yes, 0 = No)
bit 8
Synchronous read supported
(1 = Yes, 0 = No)
bit 9
Simultaneous operation supported
(1 = Yes, 0 = No)
bit 10 to 31 Reserved; undefined bits are ‘0’. If bit 31 is ’1’ then another
31 bit field of optional features follows at the end of the bit-30
field.
(P+9)h = 42h
0001h Supported Functions after Suspend
Read Array, Read Status Register and CFI Query
(P+A)h = 43h
(P+B)h = 44h
0003h
0000h
bit 0
Program supported after Erase Suspend (1 = Yes, 0 = No)
bit 7 to 1 Reserved; undefined bits are ‘0’
Block Protect Status
Defines which bits in the Block Status Register section of the Query are
implemented.
(P+C)h = 45h
(P+D)h = 46h
0018h
00C0h
bit 0 Block protect Status Register Lock/Unlock
bit active
(1 = Yes, 0 = No)
bit 1 Block Lock Status Register Lock-Down bit active (1 = Yes, 0 = No)
bit 15 to 2 Reserved for future use; undefined bits are ‘0’
VDD Logic Supply Optimum Program/Erase voltage (highest performance)
bit 7 to 4 HEX value in volts
bit 3 to 0 BCD value in 100 mV
VPP Supply Optimum Program/Erase voltage
bit 7 to 4 HEX value in volts
bit 3 to 0 BCD value in 100 mV
Value
"P"
"R"
"I"
"1"
"3"
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1.8V
12V
65/87
Share Link: 