NXP Semiconductors
PCA85176
Universal LCD driver for low multiplex rates
9. Limiting values
CAUTION
Static voltages across the liquid crystal display can build up when the LCD supply voltage
(VLCD) is on while the IC supply voltage (VDD) is off, or vice versa. This may cause unwanted
display artifacts. To avoid such artifacts, VLCD and VDD must be applied or removed together.
Table 15. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
VDD
supply voltage
−0.5
VLCD LCD supply voltage
−0.5
VI
input voltage
on each of the pins CLK,
−0.5
SDA, SCL, SYNC, SA0,
OSC, A0 to A2
VO
output voltage
on each of the pins S0 to
−0.5
S39, BP0 to BP3
II
input current
−10
IO
output current
−10
IDD
supply current
−50
IDD(LCD) LCD supply current
−50
ISS
ground supply current
−50
Ptot
total power dissipation
-
Po
output power
-
VESD electrostatic discharge HBM
[1] -
voltage
MM
[2] -
CDM
[3] -
Ilu
Tstg
Toper
latch-up current
storage temperature
operating temperature
[4] -
[5] −55
−40
Max
Unit
+6.5
V
+9.0
V
+6.5
V
+9.0
V
+10
mA
+10
mA
+50
mA
+50
mA
+50
mA
400
mW
100
mW
±2000 V
±200
V
±1000 V
200
mA
+150
°C
+95
°C
[1] Pass level; Human Body Model (HBM), according to Ref. 5 “JESD22-A114”
[2] Pass level; Machine Model (MM), according to Ref. 6 “JESD22-A115”
[3] Pass level; Charged-Device Model (CDM), according to Ref. 7 “JESD22-C101”
[4] Pass level; latch-up testing according to Ref. 8 “JESD78” at maximum ambient temperature (Tamb(max)).
[5] According to the NXP store and transport requirements (see Ref. 10 “NX3-00092”) the devices have to be
stored at a temperature of +8 °C to +45 °C and a humidity of 25 % to 75 %. For long term storage products
deviant conditions are described in that document.
PCA85176_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 14 April 2010
© NXP B.V. 2010. All rights reserved.
26 of 44