STA335W View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STA335W

2.0-channel high-efficiency digital audio system

STMicroelectronics 

Register description

STA335W

The Volume structure of the STA335W consists of individual volume registers for each

channel and a master volume register that provides an offset to each channels volume

setting. The individual channel volumes are adjustable in 0.5 dB steps from +48 dB to -

80 dB.

As an example if C1V = 0x00 or +48 dB and MV = 0x18 or -12 dB, then the total gain for

channel 1 = +36 dB.

The master mute, when set to 1, mutes all channels at once, whereas the individual channel

mutes (CxM) mutes only that channel. Both the master mute and the channel mutes provide

a “soft mute” with the volume ramping down to mute in 4096 samples from the maximum

volume setting at the internal processing rate (approximately 96 kHz).

A “hard (instantaneous) mute” can be obtained by programming a value of 0xFF (255) to

any channel volume register or the master volume register. When volume offsets are

provided via the master volume register any channel whose total volume is less than -80 dB

is muted.

All changes in volume take place at zero-crossings when ZCE = 1 (Configuration register E

(addr 0x04) on page 25) on a per channel basis as this creates the smoothest possible

volume transitions. When ZCE = 0, volume updates occur immediately.

Table 44. Master volume offset as a function of MV[7:0]

MV[7:0]

Volume offset from channel value

00000000 (0x00)

00000001 (0x01)

00000010 (0x02)

…

01001100 (0x4C)

…

11111110 (0xFE)

11111111 (0xFF)

0 dB

-0.5 dB

-1 dB

…

-38 dB

…

-127.5 dB

Hard master mute

Table 45. Channel volume as a function of CxV[7:0]

CxV[7:0]

Volume

00000000 (0x00)

+48 dB

00000001 (0x01)

+47.5 dB

00000010 (0x02)

…

+47 dB

…

01011111 (0x5F)

+0.5 dB

01100000 (0x60)

0 dB

01100001 (0x61)

-0.5 dB

…

11010111 (0xD7)

…

-59.5 dB

11011000 (0xD8)

-60 dB

30/43

Share Link: