M24512-WCS6TP View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
M24512-WCS6TP Datasheet PDF : 40 Pages
| |||
DC and AC parameters
M24512-W M24512-R M24512-DR M24512-DF
Table 13. DC characteristics (M24512-W, device grade 6)
Symbol
Parameter
Test conditions (see Table 6 and
Table 9)
Min. Max. Unit
ILI
Input leakage current
(SCL, SDA, E2, E1,
VIN = VSS or VCC
E0)
device in Standby mode
-
± 2 µA
ILO
Output leakage
current
SDA in Hi-Z, external voltage applied
on SDA: VSS or VCC
-
± 2 µA
VCC = 2.5 V, fc = 400 kHz
(rise/fall time < 50 ns)
2(1)
mA
ICC
Supply current (Read)
VCC = 5.5 V, fc = 400 kHz
(rise/fall time < 50 ns)
2
mA
2.5 V < VCC < 5.5 V, fc = 1 MHz
(rise/fall time < 50 ns)
2.5 mA
ICC
Supply current (Read)
2.5 V < VCC < 5.5 V, fc = 400 kHz
(rise/fall time < 50 ns)
ICC0 Supply current (Write) During tW, 2.5 V < VCC < 5.5 V
ICC1
Standby supply
current
Device not selected(3), VIN = VSS or
VCC, VCC = 2.5 V
Device not selected, VIN = VSS or VCC,
VCC = 5.5 V
VIL
Input low voltage
(SCL, SDA, WC)
2
mA
-
5(2)
mA
-
2
µA
-
3
µA
–0.45 0.3 VCC V
Input high voltage
(SCL, SDA)
VIH
Input high voltage
(WC, E2, E1, E0)
0.7 VCC 6.5
V
0.7 VCC VCC+0.6 V
VOL Output low voltage
IOL = 2.1 mA, VCC = 2.5 V or
IOL = 3 mA, VCC = 5.5 V
-
0.4
V
1. For devices identified by process letter AB: ICC(max) = 1 mA.
2. Characterized value, not tested in production.
3. The device is not selected after power-up, after a Read instruction (after the Stop condition), or after the
completion of the internal write cycle tW (tW is triggered by the correct decoding of a Write instruction).
26/40
Doc ID 16459 Rev 26
Share Link: 