ST72334J/N, ST72314J/N, ST72124J
I/O PORT PIN CHARACTERISTICS (Cont’d)
16.8.2 Output Driving Current
Subject to general operating conditions for VDD, fOSC, and TA unless otherwise specified.
Symbol
Parameter
Conditions
Min
Max
Unit
VOL 1)
Output low level voltage for a standard I/O pin
when 8 pins are sunk at same time
(see Figure 84 and Figure 87)
Output low level voltage for a high sink I/O pin
when 4 pins are sunk at same time
(see Figure 85 and Figure 88)
VOH 2)
Output high level voltage for an I/O pin
when 4 pins are sourced at same time
(see Figure 86 and Figure 89)
IIO=+5mA TA≤85°C
1.3
TA≥85°C
1.5
IIO=+2mA TA≤85°C
TA≥85°C
0.65
0.75
IIO=+20mA, TA≤85°C
TA≥85°C
IIO=+8mA TA≤85°C
TA≥85°C
1.5
1.7
V
0.75
0.85
IIO=-5mA, TA≤85°C VDD-1.6
TA≥85°C VDD-1.7
IIO=-2mA TA≤85°C VDD-0.8
TA≥85°C VDD-1.0
Figure 84. Typical VOL at VDD=5V (standard)
Vol [V] at Vdd=5V
2.5
Ta=-40°C
2
Ta=85°C
Ta=25°C Ta=125°C
1.5
Figure 86. Typical VOH at VDD=5V
Voh [V] at Vdd=5V
6
5
4
1
3
Ta=-40°C Ta=85°C
0.5
2
Ta=25°C Ta=125°C
0
1
0
2
4
6
8
10
-8
-6
-4
-2
0
Iio [mA]
Iio [mA]
Figure 85. Typical VOL at VDD=5V (high-sink)
Vol [V] at Vdd=5V
2
Ta=-40°C
Ta=85°C
1.5
Ta=25°C Ta=125°C
1
0.5
0
0
5
10
15 20 25 30
Iio [mA]
Notes:
1. The IIO current sunk must always respect the absolute maximum rating specified in Section 16.2.2 and the sum of IIO
(I/O ports and control pins) must not exceed IVSS.
2. The IIO current sourced must always respect the absolute maximum rating specified in Section 16.2.2 and the sum of
IIO (I/O ports and control pins) must not exceed IVDD. True open drain I/O pins does not have VOH.
129/153