STLC5464 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STLC5464

MULTI-HDLC WITH n x 64 SWITCHING MATRIX ASSOCIATED

STMicroelectronics 

STLC5464

VIII - INTERNAL REGISTERS (continued)

VIII.29 - Interrupt Register - IR (38)H

bit15

bit8 bit7

Nu Nu SFCO PRSR TIM INT INT Tx Tx Rx

FOV FWAR FOV FWAR FOV

After reset (0000)H

Rx

FWAR

ICOV

MTX

MRX

C/IRX

bit 0

HDLC

This register is read only.

When this register is read by the microprocessor, this register is reset (0000)H.

If not masked, each bit at ”1” generates ”1” on INT0 pin.

HDLC : HDLC INTERRUPT

HDLC = 1, Tx HDLC or Rx HDLC has generated an interrupt The status is in the HDLC

queue.

C/IRX : Command/Indicate Rx Interrupt

C/IRX = 1, Rx Commande/Indicate has generated an interrupt. The status is in the HDLC

queue.

MRX

: Rx MONITOR CHANNEL INTERRUPT

MRX = 1, one Rx MONITOR CHANNEL has generated an interrupt.The status is in the Rx

Monitor Channel queue.

MTX

: Tx MONITOR CHANNEL INTERRUPT

MTX = 1, one or several Tx MONITOR CHANNELS have generated an interrupt. Transmit

Monitor Interrupt Register (TMIR) indicates the Tx Monitor Channels which have generated

this interrupt.

ICOV

: INTERRUPT CIRCULAR OVERLOAD

ICOV = 1, One of three circular interrupt memories is completed.

RxFWAR : Rx DMA CONTROLLER FIFO WARNING

RxFWAR = 1, Rx DMA CONTROLLER has generated an interrupt, its fifo is 3/4 completed.

RxFOV : Rx DMA CONTROLLER FIFO OVERLOAD

RxFOV = 1, Rx DMA CONTROLLER has generatedan interrupt,it cannottransfer data from

Rx HDLC to external memory, its fifo is completed.

TxFWAR : Tx DMA CONTROLLER FIFO WARNING

TxFWAR = 1, Tx DMA CONTROLLER has generated an interrupt, its fifo is 3/4 completed.

TxFOV : Tx DMA CONTROLLER FIFO OVERLOAD

TxFOV = 1, Tx DMACONTROLLER has generated an interrupt, it cannot transfer data from

Tx HDLC to external memory, its fifo is completed.

INTFWAR : INTERRUPT CONTROLLER FIFO WARNING

INTFWAR = 1, INTERRUPT CONTROLLER has generated an interrupt, its fifo is 3/4

completed.

INTFOV : INTERRUPT CONTROLLER FIFO OVERLOAD

INTFOV = 1, INTERRUPT CONTROLLER has generated an interrupt, it cannot transfer

status from DMA and GCI controllers to external memory, its internal fifo is completed.

TIM

: TIMER

TIM = 1, the programmable timer has generated an interrupt.

PRSR : Pseudo Random Sequence Recovered

PRSR = 1,the Pseudo Random Sequencetransmitted by the generatorhas been recovered

by the analyzer.

SFCO : Sequence Fault Counter Overload

SFCO = 1, the Fault Counter has reached the value FFFF(H).

73/83

Share Link: