PIC12F635/PIC16F636/639
FIGURE 15-7:
BROWN-OUT DETECT TIMING AND CHARACTERISTICS
VDD
VBOD
(Device in Brown-out Detect)
(Device not in Brown-out Detect)
35
Reset (due to BOD)
64 ms Time-out(1)
Note 1: 64 ms delay only if PWRTE bit in Configuration Word register is programmed to ‘0’.
TABLE 15-4: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER
AND BROWN-OUT DETECT REQUIREMENTS
Param
No.
Sym
Characteristic
Min Typ† Max Units
Conditions
30
TMCL MCLR Pulse Width (low)
2
—
— μs VDD = 5.0V, -40°C to +85°C
11
18
24 ms Extended temperature
31
TWDT Watchdog Timer Time-out Period 10
17
25 ms VDD = 5.0V, -40°C to +85°C
(no prescaler)
10
17
30 ms Extended temperature
32
TOST Oscillation Start-up Timer Period — 1024 TOSC — — TOSC = OSC1 period
33* TPWRT Power-up Timer Period
28*
TBD
64
TBD
132* ms VDD = 5.0V, -40°C to +85°C
TBD ms Extended Temperature
34
TIOZ I/O High-impedance from MCLR —
—
2.0 μs
Low or Watchdog Timer Reset
35
VBOD Brown-out Detect Voltage
2.025
—
2.175 V
36
TBOD Brown-out Detect Pulse Width 100*
—
— μs VDD ≤ VBOD (D005)
Legend: TBD = To Be Determined
* These parameters are characterized but not tested.
† Data in ‘Typ’ column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
© 2005 Microchip Technology Inc.
Preliminary
DS41232B-page 165